PolyEdge - Polyurea - Poly Coatings Get a Quote
Powered by ArmorThane

ArmorThane is our referral for systems and applicators.

Request a quote Find an applicator

WHY A SPRAY-ON BEDLINER IS A MUST FOR YOUR TRUCK?

If you own a truck, then you recognize the value of having a protective coating for the bed. After all, truck beds take a huge quantity of abuse-- mainly if you utilize your automobile every day to transport things around. This is why it's so essential to get a bedliner to maintain your investment. Bedliners are fantastic method to secure the bed and prevent mishaps such as scratching your paint. But what kind should you get? And is one type more reliable than the other? Initially, understand that there are two classifications for truck bedliners, drop-in and spray-on. Unlike a spray-on bedliner, drop-in bedliners can quickly be taken in and out of the truck bed, which offers very little benefits for the number of downfalls the drop-in gives the table. The cost is not far off from one another. The advantages of the drop in would be the ease of install, but there are massive weak points to drop-in bedliners, many of which can seriously damage your lorry. For example, if you have an ...

Polyaspartic Floor Coating Options

  Polyaspartic floor coatings have become increasingly popular in recent years due to their many advantages over traditional epoxy coatings. These coatings offer a durable, long-lasting, and attractive solution for both residential and commercial floors. In this blog post, we will explore the benefits and applications of polyaspartic floor coatings. Durability depends on the complete floor system, surface preparation and service conditions. Do not assume that every polyaspartic resists every industrial chemical or that epoxy will necessarily peel. Ask for the exact product’s abrasion and chemical-resistance information and suitability for the expected traffic. Fast return to foot traffic is not the same as full cure. As one product-specific example, Sika’s Sikafloor-515 data lists about 4 hours to foot traffic, 8 hours to light traffic and 5 days to full cure at 68°F (20°C). Those figures are not a schedule for other products. Follow the selected system’s instructions fo...

What Are The Leading Types Of Protective Coatings And What Are The Benefits Of Each?

Polyurea is a subgroup of polyurethane and like epoxy, it's a 2-component product (Part A and Part B). The main difference is that polyurethane is an acrylic resin that's formed by the coagulation of acrylic liquid, whereas polyurethane is formed by evaporation. It's used primarily for its durability and resistance to chemicals. The polyurethane resin is an emulsion that's formed by mixing an acrylic binder with water. The binder binds to the liquid in the form of foam. The resin can be thick or thin, depending on the resin content of the binder. A polymer can attach to any emulsion, while any emulsion could bond to a polymer. Polyurethane is most often used in ceilings, flooring and floor coverings. The resin is used for its strength and resiliency against heat and chemicals. Its also used in electrical equipment, such as transformers and valves. Its also used in toys, such as table legs and toy cars. Polyurethane fluid is a thicker liquid used for painting. It's m...

Creating The Perfect Polyurea Pond

  P olyurea, a spray-applied coating of plastic, is applied using special equipment and training.   This article is called "Preparing to Polyurea" as you won't likely be using it yourself.   To get the best return on your investment, you'll need to become a polyurea spray applicator.   Maintenance and upkeep are also important.   It is expensive to leave equipment on its own for too long between jobs. If you would like to know more about the process of applying polyurea to your pond creation, read on and see what you can learn from the 30 years of experience we have applied to this article for you. Tech Specifications Polyurea is a two-part product that is delivered to the surface to coat at around 200 degrees Fahrenheit. It can also be applied to surfaces with a special set of heated hoses, pumping equipment, and a sprayer.   The pumping system heats the two components (amines & isocyanate) and then transfers them to the spray gun via heated ...

Creating The Perfect Foundation With Polyurea

  O ne of the reasons that you see many relatively new homes faltering to the point of collapse is because they weren't properly sealed in the first place. When you pair unsealed foundations with a high-moisture environment, the result is a rapidly decaying foundation. In the past excuses could be made, we didn't know as much as we do now and resources like polyurea coating weren't as well known or utilized. But the truth of the matter is that with advances in technology that have come along in the last 100 years, this type of foundation protection was as much a part of the plan as it was for the early days. And the advances and innovations in the field have come a long way since then. Now, it is as much a part of the plan as it was in the early days. And it looks like it will be a part of the plan for a very long time. In the late 1980s, when polyurea coatings first became widely utilized, it was the kind of protection available that it didn't do as well as people expe...

Polymer Garage Floor Coatings

  Have you been considering sprucing up your garage with an updated and fresh look? Polymer floor coatings are becoming increasingly popular among homeowners as they provide a durable, low maintenance solution for their often-used space. With a variety of options ranging from solid color epoxies to granite chip style sunshield, these unique finishes can dress up any garage in no time. Keep reading to learn more about the features and benefits of polymer garage floor coatings so you can decide if it is the right choice for your next project! What are Polymer Garage Floor Coatings and what are their advantages Polymer garage floor coatings are a popular choice when it comes to coating the surface of garage floors. These coatings are made up of a mixture of polymer resins and curing agents, which combine to create a durable and long-lasting coating that can withstand heavy foot traffic, spills, and abrasions. The advantages of polymer garage floor coatings are many. For one, they are...

Applying Spray Coating (The Right Way)

Today you'll learn how to select the proper tools and equipment mask and prep the vehicle and apply Rhino Linings on to the truck bed tools and equipment. Proper tools and equipment, in addition to a well-trained technician, will ensure a high quality finished product. Let'S take a look at the tools: you'll need a nylon cut brush on a multi speed. Polisher is important to prepare the factory paint to service for the Rhino Linings product to properly bond 60. Grit sandpaper is ideal to sand all areas in the corners and near wire tape lines where the cut brush can't reach masking paper and masking tape are necessary for covering areas of the truck that do not get coated with the Rhino Linings. Protective coating, wire trim tape is essential for defining clean straight lines on the truck where the exposed factory paint and the Rhino Linings protective coating meet. Denatured, alcohol or tack. Cloth is important to remove dust and debris from the vehicle. Please do not...

PRIMARY & SECONDARY CONTAINMENT

Polyurea is catenulate by reaction of diisocyanates and diamines, and it is one of the toughest logical polymer materials. These are any of its attributes: Alto strength with tensile posture higher than 5,000 psi and snap posture higher than 500 lbs/in 100% state with no vaporizable nonsynthetic compounds (VOC) Broad hardness orbit that's adjustable up to get D Gracious chemical condition Excellent detrition resistance Water-tight qualities The activity between diisocyanate and diamine to make polyurea can be really hastening. The exothermal heat in grow pushes the activity to ending.  No complicated setup nor intolerant conditions are requisite. This activeness makes it gettable to mix these two components together by calculable ratio and lot the resulting foodstuff onto a stratum. Antithetic wideness of attacker polyurea coatings, can be applied anywhere on various substrates. In drill, a falsetto somatesthesia spraying equipment is used supposition of fast-settin...

5 Important Home Improvement Areas Of Focus

Almost everyone in the neighborhood has had at least one improvement project in their house, especially if you live in the suburbs. Now, home improvement is an excellent investment and it can even add a lot of value to your home. In doing this, you need to ensure that all your projects are going to be successful. Here are five areas that you should weigh before starting a project. Cost You can look for free quotations if you want to check the cost. Most companies can give you detailed cost and pricing on all items. Just provide the vital information, and they can give you everything that you need, including the design if you don’t have one. Hire a contractor or directly oversee the project After you have evaluated the cost of your project, look for a right contractor who will manage the project. All you have to do is procure them general instructions, and they will do all the rest. However, you can also control your project and hire people directly. Like for example, i...

Search This Blog

ArmorThane Foundations Polyurea Protective Coatings

Perfecting Foundations With Polyurea


One of the reasons that you see many relatively new homes faltering to the point of collapse is because they weren't properly sealed in the first place. When you pair unsealed foundations with a high-moisture environment, the result is a rapidly decaying foundation. In the past excuses could be made, we didn't know as much as we do now and resources like polyurea coating weren't as well known or utilized.

But the truth of the matter is that with advances in technology that have come along in the last 100 years, this type of foundation protection was as much a part of the plan as it was for the early days. And the advances and innovations in the field have come a long way since then. Now, it is as much a part of the plan as it was in the early days. And it looks like it will be a part of the plan for a very long time. In the late 1980s, when polyurea coatings first became widely utilized, it was the kind of protection available that it didn't do as well as people expected. They expected to have better performance and they did. This wasn't a bad coating but in the early 2000's it became much improved and then suddenly, in the early 2010s, it has skyrocketed in demand because people were finding out what a good product it was for their foundation.

Polyurea coatings are now one of the most versatile coatings available that is part of the American Spirit of innovation. You name it. You could find a use for it. And, not just in your foundation. In your garage floors, in the parking garage or even in outdoor furniture. There is no end to the use of polyurea.


Polyurea has amazing qualities that can make it a good product to use on the outside of a house or garage as well as on the inside. It is a tough coating. And, while it is tough, it is not brittle.


It is also a low odor and low moisture type of coating. Polyurea coatings are known for their ease of use and quick application as well as the low fumes and the low odor of the coating.

And it is a very durable coating. There are some coatings that are known for their durability. Polyurea coatings have very good to excellent resistance in adverse outdoor conditions.

It is also available in powder form that can be applied by an airless spray device. This type of polyurea is used more often in outdoor applications. It is used more in garages and exterior areas of houses. It's more popular for outdoor furniture because its durability is great in harsh outdoor situations. And, it is known for its resistance to corrosion.

With the advancements in the field of polyurea coatings, its application has come to the next level. It now is known for its resistance to wear. And, it is also available in primer form. And, its usage is also known for its resistance to sunburn and to fade. And, now it is more popular with the people for their outside walls and fences because of its ability to provide a moisture barrier that has prevented the wall from fading. And, it is also known for its resistance to mold. The use of polyurea is also known to be good. It is a good product, as far as the exterior coatings are concerned.


With all of these qualities, polyurea is a product that is a good choice in the interior as well as in the exterior areas of a building. The best way to use it is to put it on the outside parts using the polyurea primer or polyurea powder.

Powered by ArmorThane

Talk to an applicator

ArmorThane is our referral for systems and applicators.

Post a Comment

0 Comments

Get a Quote